Amana · Oven Moderate

F1 — Amana Range/Oven F1 — Oven Sensor / Control Fault

F1 indicates a problem with the oven temperature sensor, its wiring, or the control.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
producthelp.amana.com ↗

How to fix it

  1. Turn the oven off at the breaker for a minute to reset.
  2. If F1 returns, test the oven sensor for correct resistance and inspect its wiring.
  3. Replace the sensor if out of spec; otherwise suspect the control.

Why it happens

Typical signs: Oven inaccurate or inoperative · F1 on the display, often with a tone

  • Failed oven temperature sensor The sensor (RTD) is out of range or failed.
  • Sensor wiring fault A damaged or shorted sensor harness.
  • Control board fault Less commonly, the control itself.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana Oven Temperature Sensor Common replacement
    Amazon →

Related repair guides

Oven Temperature Is Off — How to Calibrate It →

More Amana oven codes

F1E0 F1E0 — Electronic Control Board Fault F1E1 F1E1 — control board failure F2E0 F2E0 — stuck key on keypad F3E0 F3E0 — oven temperature sensor open F3E1 F3E1 — oven temperature sensor shorted F4 F4 — shorted oven sensor (legacy code)

All Amana codes → All oven codes →

Frequently asked questions

What does the F1 code mean on a Amana oven?

F1 indicates a problem with the oven temperature sensor, its wiring, or the control.

What causes the F1 code on a Amana oven?

Failed oven temperature sensor: The sensor (RTD) is out of range or failed. Sensor wiring fault: A damaged or shorted sensor harness. Control board fault: Less commonly, the control itself.

Is it safe to keep using a Amana oven with a F1 error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix F1 on a Amana oven?

Turn the oven off at the breaker for a minute to reset. If F1 returns, test the oven sensor for correct resistance and inspect its wiring. Replace the sensor if out of spec; otherwise suspect the control.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.