Amana · Oven Serious

F1E1 — control board failure

The main electronic control board has detected an internal fault that prevents normal operation. Usually requires control replacement.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
amana.com ↗

How to fix it

  1. Cut power at the breaker for 5 minutes and restore — try a hard reset first.
  2. If error returns immediately, the control board needs replacement.
  3. Verify model and serial before ordering; some controls require board programming.
  4. Replace the electronic control board following the service manual.

Why it happens

Typical signs: F1E1 displayed on control · Oven will not heat · Touchpad unresponsive · Beeping with error code

  • Failed electronic control board (ERC/EOC) Internal microprocessor or relay failure on the main control.
  • Voltage surge damage Recent storm or power event damaged control electronics.
  • Heat damage from oven Insulation degradation allowed excess heat to reach the control area.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana oven control board Common replacement
    Amazon →

More Amana oven codes

E0F2 E0F2 — keypad button held / stuck F1 Range/Oven F1 — Oven Sensor / Control Fault F1E0 F1E0 — Electronic Control Board Fault F2E0 F2E0 — stuck key on keypad F3E0 F3E0 — oven temperature sensor open F3E1 F3E1 — oven temperature sensor shorted

All Amana codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.