Amana · Oven Moderate

F5E0 — door switch fault

The control has received an inconsistent or invalid signal from the oven door switches. The control cannot confirm door open/closed state correctly.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
amana.com ↗

How to fix it

  1. Open and close the door firmly; check that it seats squarely against the frame.
  2. Power off, then inspect/test door switches for continuity (open vs. closed).
  3. Adjust door alignment if hinges are sagging.
  4. Replace any failed door switches.
  5. If switches and door are good, replace control board.

Why it happens

Typical signs: F5E0 displayed · Oven light behaves erratically · Won't start bake/broil · Self-clean won't initiate

  • Failed door switch Microswitch contact welded or broken — confirm with continuity test.
  • Door alignment issue Door not closing fully against the switch plunger.
  • Wiring harness fault Loose or damaged connection between door switch and control.
  • Failed control board Switch input circuit malfunctioning.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana oven door switch Common replacement
    Amazon →

More Amana oven codes

E0F2 E0F2 — keypad button held / stuck F1 Range/Oven F1 — Oven Sensor / Control Fault F1E0 F1E0 — Electronic Control Board Fault F1E1 F1E1 — control board failure F2E0 F2E0 — stuck key on keypad F3E0 F3E0 — oven temperature sensor open

All Amana codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.