Amana · Oven Moderate

F8E0 — meat probe error

The control has detected an issue with the meat probe — either an unexpected reading or it's plugged in when not in use.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
amana.com ↗

How to fix it

  1. Unplug the meat probe from the oven jack.
  2. Press Cancel and verify the error clears.
  3. Inspect probe and jack for damage; clean jack contacts with a soft brush.
  4. Test probe resistance — should change with temperature (~50K ohms cold).
  5. Replace the meat probe if faulty; replace the jack assembly if contacts are damaged.

Why it happens

Typical signs: F8E0 displayed · Probe temperature reads incorrectly · Oven cancels probe cooking · Code appears when probe isn't even in use

  • Failed meat probe Internal element open or shorted.
  • Probe inserted but not selected (or vice versa) Control sees plug but no cook function set.
  • Damaged probe jack inside oven Contacts dirty, bent, or corroded.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana oven meat probe Common replacement
    Amazon →

More Amana oven codes

E0F2 E0F2 — keypad button held / stuck F1 Range/Oven F1 — Oven Sensor / Control Fault F1E0 F1E0 — Electronic Control Board Fault F1E1 F1E1 — control board failure F2E0 F2E0 — stuck key on keypad F3E0 F3E0 — oven temperature sensor open

All Amana codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.