Amana · Oven Serious

F9 — Amana Range/Oven F9 — Miswired Outlet / Voltage Fault

F9 (F9 E0) indicates a miswired electrical outlet or incorrect voltage detected by the range.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
producthelp.amana.com ↗

How to fix it

  1. Power off at the breaker; if it was just installed, have the outlet wiring verified by an electrician.
  2. Restore power and retry; if F9 persists with a correctly-wired outlet, the control needs service.

Why it happens

Typical signs: Range will not operate correctly · F9 on the display, often after a power event

  • Miswired outlet The range outlet was wired incorrectly (common on a new install).
  • Power-line noise during an outage A surge or a key pressed during power-up can trigger it.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Outlet Voltage Tester Common replacement
    Amazon →

More Amana oven codes

E0F2 E0F2 — keypad button held / stuck F1 Range/Oven F1 — Oven Sensor / Control Fault F1E0 F1E0 — Electronic Control Board Fault F1E1 F1E1 — control board failure F2E0 F2E0 — stuck key on keypad F3E0 F3E0 — oven temperature sensor open

All Amana codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.