KitchenAid · Dryer Moderate

F2E1 — Stuck Key on User Interface

The control detected a key that has been continuously pressed for over a minute, suggesting a stuck button or failed UI.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
kitchenaid.com ↗

How to fix it

  1. Unplug the dryer for 5 minutes and restore power.
  2. Press each button to feel for one that sticks.
  3. Open the console and reseat the UI harness.
  4. If keys feel sticky or F2E1 returns, replace the user interface board.

Why it happens

Typical signs: F2E1 or F2 E1 displayed · One or more buttons not responding · Cycle starts on its own

  • Physically stuck or sticky button Spilled liquid or debris under a key
  • Failed user interface board Membrane or switch failure
  • Loose UI harness Reseating may temporarily clear

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Dryer user interface / control panel Common replacement
    Amazon →

More KitchenAid dryer codes

AF AF — Airflow Restriction E1 E1 — Thermistor Open Circuit E2 E2 — Thermistor Shorted F01 F01 — Main Control Board Failure F22 F22 — Exhaust Thermistor Fault F23 F23 — Exhaust Thermistor Shorted

All KitchenAid codes → All dryer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: kitchenaid.com.