KitchenAid · Dryer Minor

F8E1 — Steam Water Supply (Steam Dryers Only)

On steam-capable KitchenAid dryers, F8E1 indicates the steam valve isn't getting water. The cycle continues without steam.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
kitchenaid.com ↗

How to fix it

  1. Verify the cold water supply valve is fully open.
  2. Unplug the dryer and shut off water.
  3. Disconnect the inlet hose and clean the inlet valve screen.
  4. Inspect the hose for kinks; replace if damaged.
  5. If the valve has voltage but no flow, replace the inlet valve.

Why it happens

Typical signs: F8 E1 or F8E1 displayed · Steam cycle not producing steam · Inlet hose seems dry

  • Water supply shut off Hose bib closed behind the dryer
  • Kinked or pinched inlet hose Hose crushed behind the unit
  • Clogged inlet screen Debris blocking the inlet valve screen
  • Failed water inlet valve Coil open or stuck valve

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Dryer steam water inlet valve Common replacement
    Amazon →
  • Stainless braided washer/dryer inlet hose Common replacement
    Amazon →

More KitchenAid dryer codes

AF AF — Airflow Restriction E1 E1 — Thermistor Open Circuit E2 E2 — Thermistor Shorted F01 F01 — Main Control Board Failure F22 F22 — Exhaust Thermistor Fault F23 F23 — Exhaust Thermistor Shorted

All KitchenAid codes → All dryer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: kitchenaid.com.