Maytag · Washer Moderate
F0E1 — Load detected during cleaning cycle
The washer detected a load in the drum while the Clean Washer cycle was running. The Clean Washer routine must run empty to work correctly.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Easy
- Verified against
- maytag.com ↗
How to fix it
- Open the lid/door and remove any clothing or items from the drum.
- Wipe out any standing water or heavy suds.
- Restart the Clean Washer with affresh cycle empty.
- If error returns with an empty drum, disconnect the pressure-sensor hose at the tub, blow it clear, and reseat.
- If still failing, replace the pressure sensor on the control board.
Why it happens
Typical signs: F0E1 displayed at start of Clean Washer cycle · Cycle pauses or will not start · Beeping alert
- Clothes left in tub Most common — Clean Washer must run with nothing in the drum.
- Heavy detergent residue or suds Excess suds can be read as a load.
- Pressure (water-level) sensor drift Sensor reports residual water as load weight.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
More Maytag washer codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.