Maytag · Washer Moderate

Lid — / LdL — Lid lock fault (top-load)

The lid is not locking, or the lock is not reporting a locked state to the control. Cycle will not start.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
maytag.com ↗

How to fix it

  1. Open and firmly reclose the lid; ensure nothing is on top of the washer.
  2. Inspect the lid strike — replace if cracked.
  3. Unplug the washer for 30 seconds to reset.
  4. If error returns, replace the lid lock assembly (under the top panel).
  5. Run a short cycle to verify lock engages and releases.

Why it happens

Typical signs: Lid or LdL displayed · Lid lock light flashes · Washer fills but won't agitate

  • Lid not fully closed Obstruction or warped lid.
  • Failed lid lock assembly Wax motor or microswitch in lock failed.
  • Broken lid strike Plastic strike on lid is cracked.
  • Wiring harness fault Open in cable between lock and CCU.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Maytag lid lock assembly Common replacement
    Amazon →

More Maytag washer codes

E1 F9 E1 F9 — Long drain time F0E1 F0E1 — Load detected during cleaning cycle F1E1 F1E1 — Main control board failure F21 F21 — Long Drain / Drain Error F22 F22 — Door lock fault (front-load) F2E1 F2E1 — Stuck key on user interface

All Maytag codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.