Maytag · Washer Moderate

oL — Overloaded washer

The washer detected too large a load for the selected cycle and cannot agitate or spin safely. Common on HE top-loaders that calculate load size at the start.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
maytag.com ↗

How to fix it

  1. Pause the cycle and remove about a third of the load.
  2. Fluff and redistribute remaining clothes evenly.
  3. Restart on the appropriate cycle (Bulky for large items).
  4. If oL appears with normal loads, check pressure sensor hose and connections per F3E1 steps.

Why it happens

Typical signs: oL on display · Cycle pauses at start · Tub fails to balance for spin

  • Drum overloaded Clothes packed above the agitator/impeller line.
  • Items too dense Wet rugs or single heavy item exceeds capacity.
  • Pressure sensor mis-calibration Sensor reports load heavier than actual.

More Maytag washer codes

E1 F9 E1 F9 — Long drain time F0E1 F0E1 — Load detected during cleaning cycle F1E1 F1E1 — Main control board failure F21 F21 — Long Drain / Drain Error F22 F22 — Door lock fault (front-load) F2E1 F2E1 — Stuck key on user interface

All Maytag codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.