Maytag · Washer Moderate

PF — Power failure during cycle

Power failure during cycle.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Typical cost
$15-30
Verified against
producthelp.maytag.com ↗

The fix

Power cord

Power failure during cycle

$15-30 easy difficulty 20 min Tools: screwdriver

Diagnose first: Usually a brief power loss event — just press Pause/Cancel twice and restart. Recurring PF points to loose outlet, bad cord, or breaker.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Usually a brief power loss event — just press Pause/Cancel twice and restart. Recurring PF points to loose outlet, bad cord, or breaker.
  2. If diagnosis confirms the fault, replace the power cord (typical cost $15-30, about 20 min, easy DIY).

Why it happens

Typical signs: PF shown on the display · Power failure during cycle

  • Most likely: Power cord Usually a brief power loss event — just press Pause/Cancel twice and restart. Recurring PF points to loose outlet, bad cord, or breaker.

More Maytag washer codes

E1 F9 E1 F9 — Long drain time F0E1 F0E1 — Load detected during cleaning cycle F1E1 F1E1 — Main control board failure F21 F21 — Long Drain / Drain Error F22 F22 — Door lock fault (front-load) F2E1 F2E1 — Stuck key on user interface

All Maytag codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.maytag.com.