Maytag · Washer Minor

uL — Unbalanced Load

uL ("unbalanced load") on Maytag Bravos/top-load washers means the drum could not balance for the final spin. Per Maytag's official page, the washer could NOT remedy the off-balance load through its own automated methods and needs manual intervention — you must redistribute the load yourself around the washplate; it does not auto-correct on its own.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
producthelp.maytag.com ↗

How to fix it

  1. Manually redistribute the load evenly around the washplate, then restart.
  2. Confirm the washer is level.
  3. If uL is frequent, inspect the suspension rods.

Why it happens

Typical signs: Will not reach full spin · Wet clothes · uL on the display

  • Uneven/bulky load A single heavy item or load bunched to one side.
  • Machine not level A rocking washer cannot balance.
  • Worn suspension rods On Bravos, worn suspension lets the basket move too much.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Maytag Bravos Suspension Rod Kit Common replacement
    Amazon →

Related repair guides

Washer Shaking, Banging, or Walking Across the Floor →

More Maytag washer codes

E1 F9 E1 F9 — Long drain time F1E1 F1E1 — Main control board failure F21 F21 — Long Drain / Drain Error F22 F22 — Door lock fault (front-load) F2E1 F2E1 — Stuck key on user interface F33 F33 — Pump driver / electrical fault

All Maytag codes → All washer codes →

Frequently asked questions

What does the uL code mean on a Maytag washer?

uL ("unbalanced load") on Maytag Bravos/top-load washers means the drum could not balance for the final spin. Per Maytag's official page, the washer could NOT remedy the off-balance load through its own automated methods and needs manual intervention — you must redistribute the load yourself around the washplate; it does not auto-correct on its own.

What causes the uL code on a Maytag washer?

Uneven/bulky load: A single heavy item or load bunched to one side. Machine not level: A rocking washer cannot balance. Worn suspension rods: On Bravos, worn suspension lets the basket move too much.

Is it safe to keep using a Maytag washer with a uL error?

Yes — fix when convenient. This is rated a minor-severity fault.

How do I fix uL on a Maytag washer?

Manually redistribute the load evenly around the washplate, then restart. Confirm the washer is level. If uL is frequent, inspect the suspension rods.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.maytag.com.