Amana · Dishwasher Serious

F5E1 — Door Won't Latch / Sensor Failure

The door latch motor or sensor isn't confirming the latched state during operation.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
amana.com ↗

How to fix it

  1. Open the door and inspect the latch mechanism for damage.
  2. Manually close the latch with a screwdriver to verify mechanical action.
  3. Disconnect power and test latch motor resistance.
  4. Replace the door latch assembly.
  5. Confirm proper operation with a full cycle.

Why it happens

Typical signs: Cycle aborts shortly after starting · Latch motor heard cycling repeatedly · Door pops open during wash

  • Failed door latch motor Motor windings burned out.
  • Broken latch hook Plastic hook snapped from age.
  • Faulty door latch sensor Hall-effect or microswitch failed.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana dishwasher door latch assembly Common replacement
    Amazon →

More Amana dishwasher codes

Clean Light Flashing 1 Time Clean Light Flashing 1x — Control Lockout Clean Light Flashing 7 Times Clean Light Flashing 7x — Heating Element Failure F1E1 F1E1 — Control Board Failure F2E1 F2E1 — Stuck Key on Control Panel F3E1 F3E1 — Thermistor / OWI Sensor Failure F4E1 F4E1 — Door Switch Open

All Amana codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.