Amana · Washer Moderate

F02 — Long drain / pump fault

Long drain / pump fault.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$40-80

The fix

Drain pump

Long drain / pump fault

$40-80 moderate difficulty 60 min Tools: screwdriver, nut driver, pliers

Diagnose first: Check pump filter for debris first. Amana washers use the same Whirlpool platform — same parts often work cross-brand.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Check pump filter for debris first. Amana washers use the same Whirlpool platform — same parts often work cross-brand.
  2. If diagnosis confirms the fault, replace the drain pump (typical cost $40-80, about 60 min, moderate DIY).

Why it happens

Typical signs: F02 shown on the display · Long drain / pump fault

  • Most likely: Drain pump Check pump filter for debris first. Amana washers use the same Whirlpool platform — same parts often work cross-brand.

More Amana washer codes

dL dL / dU — Door/Lid Lock Fault F0E1 F0E1 / rL — Clean Washer Cycle Started With a Load Inside F1E1 F1E1 — Main Control Board Failure F21 F21 — Drain time too long F2E1 F2E1 — Stuck Key on User Interface F3E1 F3E1 — Pressure Switch / Water Level Sensor Fault

All Amana codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.