Amana · Washer Moderate

F21 — Drain time too long

Drain time too long.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$40-80
Verified against
producthelp.amana.com ↗

The fix

Drain pump

Drain time too long

$40-80 moderate difficulty 60 min Tools: screwdriver, nut driver, pliers

Diagnose first: Clear filter, check for kinked drain hose, verify standpipe height. If all clear, pump impeller is likely worn or broken.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Clear filter, check for kinked drain hose, verify standpipe height. If all clear, pump impeller is likely worn or broken.
  2. If diagnosis confirms the fault, replace the drain pump (typical cost $40-80, about 60 min, moderate DIY).

Why it happens

Typical signs: F21 shown on the display · Drain time too long

  • Most likely: Drain pump Clear filter, check for kinked drain hose, verify standpipe height. If all clear, pump impeller is likely worn or broken.

More Amana washer codes

dL dL / dU — Door/Lid Lock Fault F02 F02 — Long drain / pump fault F0E1 F0E1 / rL — Clean Washer Cycle Started With a Load Inside F1E1 F1E1 — Main Control Board Failure F2E1 F2E1 — Stuck Key on User Interface F3E1 F3E1 — Pressure Switch / Water Level Sensor Fault

All Amana codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.