Amana · Washer Minor

HC — Hot and Cold Hoses Reversed

HC (shown at the end of a cycle) means the hot and cold inlet hoses are installed reversed.

Keep using it?: Yes — fix when convenient
DIY difficulty: Easy
Verified against: producthelp.amana.com ↗

How to fix it

Turn off the water and swap the hot and cold fill hoses to the correct inlets.
Run a cycle to confirm HC clears.

Why it happens

Typical signs: HC at end of cycle · Wrong water temperatures

Inlet hoses swapped The hot hose is on the cold inlet and vice versa — common after installation.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Washer Fill Hoses Common replacement
Amazon →

More Amana washer codes

dL dL / dU — Door/Lid Lock Fault F02 F02 — Long drain / pump fault F0E1 F0E1 / rL — Clean Washer Cycle Started With a Load Inside F1E1 F1E1 — Main Control Board Failure F21 F21 — Drain time too long F2E1 F2E1 — Stuck Key on User Interface

All Amana codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.