Amana · Washer Moderate

uL — Unbalanced Load

The washer detected an unbalanced load during spin and is trying to redistribute it. Persistent uL can indicate a worn suspension component.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
producthelp.amana.com ↗

How to fix it

  1. Pause cycle, redistribute load evenly, restart Spin.
  2. Check that all four leveling legs are firm on the floor.
  3. Use a level on top of the washer; adjust legs as needed.
  4. Tip washer back and inspect suspension rods/shocks for oil leaks or play.
  5. Replace suspension components in sets if worn.

Why it happens

Typical signs: uL code · Loud thumping during spin · Clothes come out wet because spin aborted · Cycle runs much longer than normal

  • Heavy item(s) bunched on one side Towels, sheets, or jeans wadded together throw the basket off.
  • Washer not level Uneven leveling legs amplify any imbalance.
  • Worn suspension rods (top-load) or shocks (front-load) Tub can't damp normal load motion.
  • Worn snubber pad or springs Allows excessive tub movement at spin speeds.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Suspension rod kit (top-load) Common replacement
    Amazon →
  • Shock absorber (front-load) Common replacement
    Amazon →

Related repair guides

Washer Shaking, Banging, or Walking Across the Floor →

More Amana washer codes

F0E1 F0E1 / rL — Clean Washer Cycle Started With a Load Inside F1E1 F1E1 — Main Control Board Failure F21 F21 — Drain time too long F2E1 F2E1 — Stuck Key on User Interface F3E1 F3E1 — Pressure Switch / Water Level Sensor Fault F4E1 F4E1 — Heater Sensor Fault (Steam/Heated Models)

All Amana codes → All washer codes →

Frequently asked questions

What does the uL code mean on a Amana washer?

The washer detected an unbalanced load during spin and is trying to redistribute it. Persistent uL can indicate a worn suspension component.

What causes the uL code on a Amana washer?

Heavy item(s) bunched on one side: Towels, sheets, or jeans wadded together throw the basket off. Washer not level: Uneven leveling legs amplify any imbalance. Worn suspension rods (top-load) or shocks (front-load): Tub can't damp normal load motion.

Is it safe to keep using a Amana washer with a uL error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix uL on a Amana washer?

Pause cycle, redistribute load evenly, restart Spin. Check that all four leveling legs are firm on the floor. Use a level on top of the washer; adjust legs as needed.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.