GE · Oven Moderate

F7 — Stuck or Shorted Button

F7 means the control detected a key/button on the membrane keypad that is stuck or shorted closed.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$60-200
Verified against
products.geappliances.com ↗

The fix

Oven membrane keypad / touch panel

Stuck or shorted keypad button on control panel

$60-200 moderate difficulty 1 hour Tools: screwdriver, nut driver

Diagnose first: Most common cause is a failed membrane keypad with a stuck contact. On many GE models keypad and control board are integrated and must be replaced as a unit.

Find this part on Amazon →

Didn't resolve it? Next suspect: Oven electronic control board (ERC) ($150-350)

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Unplug the oven for 5 minutes and restore power to rule out a glitch.
  2. Press each button to find one that feels stuck.
  3. If F7 returns, replace the keypad (and ribbon) — on some models the keypad and control are one assembly.

Why it happens

Typical signs: Constant beeping · Oven will not accept commands · F7 on the display

  • Failed membrane keypad A worn or moisture-damaged keypad shorts a button.
  • Control board fault Less commonly, the board that reads the keypad.

More GE oven codes

dF dF — Door Latch Switch Fault F0 Range/Oven F0 — Keypanel Problem F1 F1 — Keypanel (Touchpad) Problem F2 F2 — Oven Over-Temperature F3 F3 / F4 — Oven Sensor Needs Replacement F30 F30 — Oven Temperature Sensor Circuit Open

All GE codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: products.geappliances.com.