GE · Oven Moderate

F9 — Error — Door Lock Circuit Fault

F9 means a component has failed somewhere in the oven door-lock circuit (common on self-clean ranges).

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$40-100
Verified against
products.geappliances.com ↗

The fix

Oven door lock motor assembly

Door lock circuit or door switch fault

$40-100 moderate difficulty 1 hour Tools: screwdriver, nut driver

Diagnose first: Door lock motor or its microswitches commonly fail after self-clean cycles. Verify lock travels fully and switches actuate before replacing the control board.

Find this part on Amazon →

Didn't resolve it? Next suspect: Oven door switch ($15-40)

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Turn the oven off at the breaker for a minute to reset.
  2. If F9 returns, inspect the door-lock motor/switch and its wiring.
  3. Replace the door-lock assembly if it has failed.

Why it happens

Typical signs: Door lock will not engage/release · Oven inoperative · F9 on the display

  • Failed door-lock motor or switch The self-clean lock motor or its position switch has failed.
  • Lock-circuit wiring fault A wiring/connector problem in the lock circuit.

More GE oven codes

dF dF — Door Latch Switch Fault F0 Range/Oven F0 — Keypanel Problem F1 F1 — Keypanel (Touchpad) Problem F2 F2 — Oven Over-Temperature F3 F3 / F4 — Oven Sensor Needs Replacement F30 F30 — Oven Temperature Sensor Circuit Open

All GE codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: products.geappliances.com.