GE · Oven Moderate

FC — GE Range/Oven FC — Door Lock Circuit Failure

FC indicates a failure in the oven door-lock circuit (self-clean latch).

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
products.geappliances.com ↗

How to fix it

  1. Reset at the breaker for 30 seconds.
  2. If FC returns, inspect and replace the door-lock motor/switch assembly.

Why it happens

Typical signs: Door lock will not engage/release · FC on the display

  • Failed door-lock motor or switch The self-clean lock motor/switch has failed.
  • Lock-circuit wiring fault A wiring/connector problem.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • GE Oven Door Lock Motor Common replacement
    Amazon →

More GE oven codes

dF dF — Door Latch Switch Fault F0 Range/Oven F0 — Keypanel Problem F1 F1 — Keypanel (Touchpad) Problem F2 F2 — Oven Over-Temperature F3 F3 / F4 — Oven Sensor Needs Replacement F30 F30 — Oven Temperature Sensor Circuit Open

All GE codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: products.geappliances.com.