KitchenAid · Washer Serious

F5E2 — Lid Lock Will Not Lock

The lid lock mechanism failed to engage. The washer cannot proceed because the lid must be securely locked before fill/agitation.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
kitchenaid.com ↗

How to fix it

  1. Unplug washer
  2. Inspect lid lock assembly for debris and clear
  3. Check that lid strike aligns with lock body
  4. Reconnect harness and verify seating
  5. Replace lid lock assembly if mechanically failed

Why it happens

Typical signs: F5E2 displayed · Lid lock light flashes but doesn't lock · Cycle won't start · Audible clicking from lock

  • Obstruction in lid lock Debris/lint blocking the strike or solenoid
  • Failed lid lock assembly Solenoid or motor inside lock failed
  • Bent/misaligned strike Strike not reaching the lock body
  • Wiring harness issue Connection to lock damaged

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

More KitchenAid washer codes

F0E1 F0E1 — Load Detected During Clean Washer Cycle F1E1 F1E1 — Main Control Board Failure F2E1 F2E1 — Stuck Button on User Interface F3E1 F3E1 — Pressure Switch Failure F5E1 F5E1 — Lid Switch Fault F5E3 F5E3 — Lid Lock Will Not Unlock

All KitchenAid codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: kitchenaid.com.