KitchenAid · Washer Minor

Ud — / UL — Unbalanced Load

The washer detected an unbalanced load during spin. The drum cannot safely spin up to speed with the current load distribution.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
kitchenaid.com ↗

How to fix it

  1. Pause cycle and redistribute laundry evenly around the drum
  2. For single heavy items, add a few smaller items to balance
  3. Restart the spin cycle
  4. Verify washer is level with a bubble level
  5. Adjust leveling feet so washer doesn't rock
  6. Inspect suspension rods/springs for wear

Why it happens

Typical signs: Ud or UL displayed · Washer not reaching full spin speed · Loud banging during spin · Clothes very wet at end

  • Single heavy item One large towel or rug shifting to one side
  • Bunched/tangled laundry Items wrapped together
  • Washer not level Feet not adjusted properly
  • Worn suspension rods (top load) Tub not centered

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

More KitchenAid washer codes

F0E1 F0E1 — Load Detected During Clean Washer Cycle F1E1 F1E1 — Main Control Board Failure F2E1 F2E1 — Stuck Button on User Interface F3E1 F3E1 — Pressure Switch Failure F5E1 F5E1 — Lid Switch Fault F5E2 F5E2 — Lid Lock Will Not Lock

All KitchenAid codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: kitchenaid.com.