Er IT — Ice maker assembly internal fault
The ice maker assembly reported an internal system error during a self-test — typically a stuck motor, sensor, or harvest mechanism inside the ice maker module.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Moderate
- Verified against
- lg.com ↗
How to fix it
- Unplug the unit and remove the ice bin/assembly.
- Thaw any ice blockage in the chute or fill cup with warm water.
- Inspect the ice maker harness/plug; reseat firmly.
- Reinstall and run the ice maker self-test (per owner's manual).
- If Er IT returns, replace the ice maker assembly as a unit.
- Verify fill volume is correct — overfilling causes refreeze.
Why it happens
Typical signs: Er IT on display · Ice maker not cycling · Cubes partially formed and stuck · Self-test fails on the ice maker
- Jammed ice harvest mechanism Frozen-together cubes block the auger or tray flip.
- Failed ice maker module Internal motor or controller in the icemaker module.
- Failed fill tube or chute icing Slush refreeze blocks the fill cup.
- Ice maker harness disconnected Connector at the ice maker plug unseated.
Replace your water filter
A clogged or overdue water filter is a common cause of low water and ice flow on LG refrigerators — they are meant to be changed about every 6 months. The OEM-style filter that fits most LG refrigerators is the LT1000P ($45-55 OEM, $18-28 compatible).
- LG LT1000P refrigerator water filter OEM water filterAmazon →
Not sure which filter fits your model? See the full compatibility guide →
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- LG ice maker assembly Common replacementAmazon →
Related repair guides
More LG refrigerator codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: lg.com.