GE · Washer Moderate

H2O — No water detected entering tub

No water detected entering tub.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Typical cost
$25-60
Verified against
products.geappliances.com ↗

The fix

Water inlet valve

No water detected entering tub

$25-60 easy difficulty 30 min Tools: screwdriver, nut driver, pliers

Diagnose first: Check household water supply, hose screens, and inlet valve solenoid resistance. Frozen or pinched supply lines are a common winter cause.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Check household water supply, hose screens, and inlet valve solenoid resistance. Frozen or pinched supply lines are a common winter cause.
  2. If diagnosis confirms the fault, replace the water inlet valve (typical cost $25-60, about 30 min, easy DIY).

Why it happens

Typical signs: H2O shown on the display · No water detected entering tub

  • Most likely: Water inlet valve Check household water supply, hose screens, and inlet valve solenoid resistance. Frozen or pinched supply lines are a common winter cause.

More GE washer codes

dF / dE dF / dE — Door Lock Engagement Error E22 E22 — Drain Pump / Drain Time Exceeded E23 Drain Pump Error — Will Not Drain E31 E31 — Pressure Sensor Fault E42 E42 — Door Lock Will Not Unlock E43 E43 — Door Open During Cycle

All GE codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: products.geappliances.com.