Maytag · Dryer Minor
dET — Detergent / Dispenser Not Detected (Steam Models)
On steam-capable Maytag dryers, the control did not detect the dispenser/cartridge or sees the steam water line not primed. Cycle will run but steam features may be disabled.
- Keep using it?
- Yes — fix when convenient
- DIY difficulty
- Easy
- Verified against
- maytag.com ↗
How to fix it
- Confirm the cold water supply valve to the dryer is fully open.
- Disconnect the inlet hose and clean the inlet screen at the valve.
- Run a steam cycle and listen for the inlet valve clicking.
- If no flow, measure the valve solenoid winding; replace the valve if open or stuck.
- Run the cycle once or twice to purge air from the steam line.
- If still failing, replace the steam control assembly.
Why it happens
Typical signs: dET on display · Steam cycle won't start · Refresh/Sanitize cycle ends quickly · Water inlet not filling
- Water supply valve closed Most common — install supply valve never opened or was turned off.
- Kinked or clogged inlet hose / screen Inlet screen plugged with debris.
- Failed water inlet valve Solenoid stuck or open winding.
- Air in steam line on first use Needs to be primed.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- Maytag dryer water inlet valve (steam) Common replacementAmazon →
More Maytag dryer codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.