Maytag · Dryer Moderate

F02 — Keypad / User Interface Stuck Key

The control detected a button on the user interface that has been pressed for more than ~1 minute, or sees a shorted key. The dryer will not respond to commands.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
maytag.com ↗

How to fix it

  1. Unplug the dryer for 1 minute and plug back in.
  2. Press each button individually to identify a sticky or unresponsive one.
  3. Clean the console face with a slightly damp cloth (never spray cleaner on it).
  4. If a key is physically stuck, replace the keypad/membrane assembly.
  5. If all keys feel normal but the code persists, replace the user interface board.
  6. Verify operation with a test cycle.

Why it happens

Typical signs: F02 on display · Buttons not responding correctly · Dryer beeps repeatedly · Cycle won't start

  • Stuck or shorted membrane button Most common — the touch panel membrane has a key shorted closed.
  • Spilled liquid or debris on console Sticky residue can hold a button down.
  • Failed user interface board Less common — the UI board itself has failed.
  • Loose ribbon cable Connection between keypad and UI board is loose.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Maytag dryer user interface / keypad assembly Common replacement
    Amazon →

More Maytag dryer codes

AF AF — Airflow Restricted dET dET — Detergent / Dispenser Not Detected (Steam Models) E1 E1 — Thermistor Open Circuit (Generic) E2 E2 — Thermistor Shorted F01 F01 — Main Control Board Fault F22 F22 — Outlet Thermistor Fault

All Maytag codes → All dryer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.