Frigidaire ATF7000FE Error Codes
Affinity 3.5 Cu. Ft. Front-Load Washer
14 error codes are documented for this specific model, cross-checked against manufacturer service documentation.
- E11 Washer E11 — Fill time too long
- E13 Washer E13 — Water leak or air leak in pressure system
- E21 Washer E21 — Slow drain / water remains in tub
- E31 Washer E31 — Pressure sensor communication failure
- E41 Washer E41 — Door switch open during cycle
- E52 Washer E52 — Bad signal from tachometer on motor
- E57 Washer E57 — High motor current
- E5B Washer E5B — Motor Control Heat Sink Over-Temperature
- E5E Washer E5E — Communication error between motor control and main board
- E5F Washer E5F — Communication fault, intermittent
- E66 Washer E66 — Heating element relay failure (steam/heated wash models)
- E91 Washer E91 — UI Board / Main Control Communication Error
- EF1 Washer EF1 — Drain pump filter clogged
- EF2 Washer EF2 — Too much detergent / oversudsing
Source: Factory service/technical documentation for this model. Some of these fault codes may also apply to other models built on the same control platform — check your own model's meaning page for confirmation.